Design and Structural Performance Analysis of a Compact Intelligent Bird Repellent Device with Double-Pitched Roof
-
Abstract
Bird-related hazards occur frequently on transmission towers. Traditional bird prevention methods have limited coverage, and birds readily become habituated to them. To address this, a compact intelligent bird repellent device was designed. Its enclosure adopts a gable roof structure, with small solar panels embedded in the roof slopes. The device integrates a Raspberry Pi 4B, a servo, and an audio module, and the camera rotates with the servo. The intelligent recognition system follows a “detection-tracking-hierarchical deterrence” architecture: centered on a Raspberry Pi 4B, it integrates visual acquisition, gimbal tracking, audio output, and power management modules; a lightweight YOLOv11n model detects bird targets, and three-level acoustic deterrence is triggered by target distance, pixel occupancy, and dwell time; event-triggered operation reduces power consumption; power is supplied by photovoltaic panels and a lithium battery with thermal management; and the feasibility of the scheme is validated against measured data from the literature. Static and modal analyses were conducted using UG and ANSYS Workbench. Under a Level 10 wind load, the maximum deformation is less than 1.2 μm. The first-order frequency of the whole device is 15.318 Hz, corresponding to the servo rotation mode, while the elastic modes of the enclosure start at 237.49 Hz, indicating a low resonance risk. This scheme can provide a design reference for bird hazard prevention and control on transmission towers.
-
-